Cheap PriceList for Stainless Steel Cooling Coil Tube - TP 316H – XINHANG
Cheap PriceList for Stainless Steel Cooling Coil Tube - TP 316H – XINHANG Detail:
TP316H stainless steel seamless pipe, also known as 1.4919 stainless steel seamless pipe, is an austenitic chromium-nickel-molybdenum stainless tube, in addition with nitrogen and boron.
They are intended for service at temperatures where creep and stress rupture properties are important. 1.4919 stainless steel seamless pipes have a very good resistance to raised temperature. Compared with 316 stainless, 316H stainless has many advantages, such as heat resistance, acid resistance and corrosion resistance. 316H stainless steel is a higher carbon variant of 316 stainless steel, which makes it more suitable for high temperature environment. The increased carbon content delivers a greater tensile and yield strength.
The austenitic structure of TP316H stainless steel seamless pipe also gives it excellent toughness, even down to cryogenic temperatures. We supply and manufacture 316H pipe with a wide range of size, from 10.0mm to 1219mm. The wall thickness of it ranges from 0.5mm to 100mm. The common length of each pipe is 5.8m, 6.0m, 11.8m, 12m. The maximum length we produce is up to 18m. XINHANG STEEL can produce TP316H pipes in strict accordance with ASTM, EN, JIS, DIN standard to meet clients’ different requirements.
TP316H stainless steel seamless pipe can be cut to size and pipe with polished finish is also available. XINHANG STEEL owns advanced production equipment and testing instruments. We can inspect our seamless pipes with 16 channel ultrasonic testing machine, 8 channel ultrasonic flaw detector, double channel ultrasonic flaw detector, eddy current flaw detector, hydrostatic testing machine, or X-ray detector.
A lot of processing services, including punching, painting, beveling, chamfering are all available for us. With b technical force, advanced equipment and skilled craftsmanship, XINHANG STEEL can manufacture 316H pipe and good quality is guaranteed.
|Size||OD: 6.0 ~ 406.4mm; WT: 1 ~ 50mm;O.D.1/8”-16”; W.T.:SCH 10(S);-SCH XXS
Length: as your requirement,11.8M MAX
|Process||Seamless, Cold Drawn, Cold Rolled,|
|Different Name||1.4919 Pipe|
|End||PE(Plain End), BE(Beveled End),|
|Surface||Aid Pickling, Polishing|
|Standard||ASTM A312, ASTM A213, EN10216-5, DIN 17456, DIN 17458, JIS G3459, JIS G3463,ASTM A269|
|Theoretical Weight(kg/m)||Weight/meter = (OD-WT)*WT*0.02507 Both OD and WT in mm.|
OD is the specified outside diameter.
WT is the specified wall thickness
Stainless steel pipes shall be pickled free of scale. When bright annealing is used, pickling is not necessary.
Plain ends cut and deburred will be furnished. If threaded ends or ends beveled for welding are desired, give details.
|C, max||0.04 to 0.10||±0.01|
|Ni||11.0 to 14.0||±0.15|
|Cr||16.0 to 18.0||±0.20|
|Mo||2.00 to 3.00||±0.10|
|Yield Strength, 0.2%
Offset, min, MPa
|Elongation in2 in. or
50mm (or 4D), min, %
|UNS S31609||Solution Annealed||515||205||35|
Tolerances in Wall Thickness
|NPS Designator||Tolerance, % from Nominal|
|1/8 to 2-1/2 incl., all t/D ratios||20||12.5|
|3 to 18 inch., t/D up to 5% incl.||22.5||12.5|
|3 to 18 inch., t/D＞5%||15||12.5|
Note: t = Nominal Wall Thickness; D = Ordered Outside Diameter
Tolerances in Outside Diameter
|NPS Designator||Tolerances in Outside Diameter|
|1/8 to 1-1/2, incl||1/64 (0.015)||0.4||1/32 (0.031)||0.8|
|Over 1-1/2 to 4, incl||1/32 (0.031)||0.8||1/32 (0.031)||0.8|
|Over 4 to 8, incl||1/16 (0.062)||1.6||1/32 (0.031)||0.8|
|Over 8 to 18, incl||3/32 (0.093)||2.4||1/32 (0.031)||0.8|
|Specified OD, in.||Specified Wall Thickness, in.||Maximum Curvature in any 3ft, in.||Maximum Curvature i Total Length, in.|
|Up to 5.0 incl.||Over 3% OD to 0.5, incl.||0.03||0.010 x length, ft|
|Over 5.0 to 8.0, incl.||Over 4% OD to 0.75, incl.||0.045||0.015 x length, ft|
|Over 8.0 to 12.75, incl.||Over 4% OD to 1.0, incl.||0.06||0.020 x length, ft|
EN10216-5 1.4919 Seamless Stainless Steel Pipe Tolerance
Tolerances for Outside Diameter (D) and Wall Thickness (T) of 316H Cold Finished Seamless Stainless Steel Pipe/Tube
|Tolerances on D≤219.1mm||Tolerances on T|
|Tolerance Class||Permissible Deviation||Tolerance Class||Permissible Deviation|
|D 3||±0.75% or ±0.3mm whichever is the greater||T 3||±10% or ±0.2mm whichever is the greater|
|D 4 a||±0.5% or ±0.1mm whichever is the greater||T 4 a||±7.5 % or ±0.15mm whichever is the greater|
|Note a : Tolerance class D 4 and T 4 is specified for tubes ordered cold finished|
Tolerances for Outside Diameter (D) and Wall Thickness (T)
|Outside Diameter D||Tolerances on D||Tolerances on T|
|mm||Tolerance Class||Permissible Deviation||Tolerance Class||Permissible Deviation|
|30 ≤ D ≤ 219.1||D 2||±1.0% or ±0.5mm whichever is the greater||T 1||±15% or ±0.6mm whichever is the greater b|
|T 2||±12.5% or ±0.4mm whichever is the greater|
|219.1 ≤ D ≤ 610||D 1||±1.5% or ±0.75mm whichever is the greater a||＋22.5% -15% C|
|T 1||±15% or ±0.6mm whichever is the greater d|
|T 2||±12.5% or ±0.4mm whichever is the greater e|
|Note a : The tubes shall be ordered with size ends. In the case a permissible deviation of the outside diameter of ±0.6% applied to the tube ends over a length of approx. 100mm.
Note b : Applies to tubes with wall thickness T≤0.01 D and T≤4mm.
Note c : Applies to tubes with wall thickness T≤0.05D
Note d : Applies to tubes with wall thickness T:0.05D ＜T≤0.09D
Note e : Applies to tubes with wall thickness T＞0.09D
Product detail pictures:
Related Product Guide:
Steel Pipe Coatings Market Key Players | Stainless Boiler Tube
Global Automotive Structural Steel Market 2019 – Gerdau S.A, ArcelorMittal, Tata Steel, Nippon Steel Sumitomo Metal, POSCO | Pemco Stainless Steel Pipe
We stick to our enterprise spirit of "Quality, Efficiency, Innovation and Integrity". We aim to create more value for our customers with our rich resources, advanced machinery, experienced workers and excellent services for Cheap PriceList for Stainless Steel Cooling Coil Tube - TP 316H – XINHANG, The product will supply to all over the world, such as: New Delhi , Doha , Morocco , We set "be a creditable practitioner to achieve the continuous development and innovation" as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.
By Rita from Angola - 2015.02.12 14:52
Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
By Giselle from Sudan - 2016.06.29 18:55