Online Exporter Customized Api 5l Gi Carbon Seamless Steel Pipe

Short Description:

Our organization puts emphasis to the administration, the introduction of talented staff, and the construction of team building, trying hard to boost the quality and liability consciousness of workers users. Our firm successfully attained IS9001 Certification and European CE Certification of Online Exporter Customized Api 5l Gi Carbon Seamless Steel Pipe, sincerity and strength ,constantly preserve approved great quanlity ,welcome to our factoty for check out and instruction and organization....


  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    Product Tags

    Our organization puts emphasis to the administration, the introduction of talented staff, and the construction of team building, trying hard to boost the quality and liability consciousness of workers users. Our firm successfully attained IS9001 Certification and European CE Certification of Online Exporter Customized Api 5l Gi Carbon Seamless Steel Pipe, sincerity and strength ,constantly preserve approved great quanlity ,welcome to our factoty for check out and instruction and organization.
    Our organization puts emphasis to the administration, the introduction of talented staff, and the construction of team building, trying hard to boost the quality and liability consciousness of workers users. Our firm successfully attained IS9001 Certification and European CE Certification of Customized Steel Pipe, Gi Carbon Seamless Steel Pipe, Gi Seamless Steel Pipe, Now, with the development of internet, and the trend of internationalization, we have decided to extend business to overseas market. With the propose of bringing more profits to oversea customers by providing directly abroad. So we have changed our mind, from home to abroad, hope to give our customers more profit, and looking forward to more chance to make business.
    TP316H stainless steel seamless pipe, also known as 1.4919 stainless steel seamless pipe, is an austenitic chromium-nickel-molybdenum stainless tube, in addition with nitrogen and boron.

    They are intended for service at temperatures where creep and stress rupture properties are important. 1.4919 stainless steel seamless pipes have a very good resistance to raised temperature. Compared with 316 stainless, 316H stainless has many advantages, such as heat resistance, acid resistance and corrosion resistance. 316H stainless steel is a higher carbon variant of 316 stainless steel, which makes it more suitable for high temperature environment. The increased carbon content delivers a greater tensile and yield strength.

    The austenitic structure of TP316H stainless steel seamless pipe also gives it excellent toughness, even down to cryogenic temperatures. We supply and manufacture 316H pipe with a wide range of size, from 10.0mm to 1219mm. The wall thickness of it ranges from 0.5mm to 100mm. The common length of each pipe is 5.8m, 6.0m, 11.8m, 12m. The maximum length we produce is up to 18m. XINHANG STEEL can produce TP316H pipes in strict accordance with ASTM, EN, JIS, DIN standard to meet clients’ different requirements.

    TP316H stainless steel seamless pipe can be cut to size and pipe with polished finish is also available. XINHANG STEEL owns advanced production equipment and testing instruments. We can inspect our seamless pipes with 16 channel ultrasonic testing machine, 8 channel ultrasonic flaw detector, double channel ultrasonic flaw detector, eddy current flaw detector, hydrostatic testing machine, or X-ray detector.

    A lot of processing services, including punching, painting, beveling, chamfering are all available for us. With b technical force, advanced equipment and skilled craftsmanship, XINHANG STEEL can manufacture 316H pipe and good quality is guaranteed.

    Specification
    Size OD: 6.0 ~ 406.4mm; WT: 1 ~ 50mm;O.D.1/8”-16”; W.T.:SCH 10(S);-SCH XXS

    Length: as your requirement,11.8M MAX

    Process Seamless, Cold Drawn, Cold Rolled,
    Different Name 1.4919 Pipe
    End PE(Plain End), BE(Beveled End),
    Surface Aid Pickling, Polishing
    Standard ASTM A312, ASTM A213, EN10216-5, DIN 17456, DIN 17458, JIS G3459, JIS G3463,ASTM A269
    Theoretical Weight(kg/m) Weight/meter = (OD-WT)*WT*0.02507    Both OD and WT in mm.

    Note:
    OD is the specified outside diameter.
    WT is the specified wall thickness
    Stainless steel pipes shall be pickled free of scale. When bright annealing is used, pickling is not necessary.
    Plain ends cut and deburred will be furnished. If threaded ends or ends beveled for welding are desired, give details.

    Chemical Composition

    Element UNS S31609(316H)
    %
    Tolerances, %
    C, max 0.04 to 0.10 ±0.01
    Mn, max 2.00 ±0.04
    P, max 0.045 ±0.005
    S, max 0.030 ±0.003
    Si, max 1.00 ±0.05
    Ni 11.0 to 14.0 ±0.15
    Cr 16.0 to 18.0 ±0.20
    Mo 2.00 to 3.00 ±0.10

    Mechanical Properties

    Alloy Temper Tensile Strength
    Min, MPa
    Yield Strength, 0.2%
    Offset, min, MPa
    Elongation in2 in. or
    50mm (or 4D), min, %
    UNS S31609 Solution Annealed 515 205 35

    Tolerances in Wall Thickness 

    NPS Designator Tolerance, % from Nominal
    Over Under
    1/8 to 2-1/2 incl., all t/D ratios 20 12.5
    3 to 18 inch., t/D up to 5% incl. 22.5 12.5
    3 to 18 inch., t/D5% 15 12.5

    Note: t = Nominal Wall Thickness; D = Ordered Outside Diameter

    Tolerances in Outside Diameter

    NPS Designator Tolerances in Outside Diameter
    Over Under
    in. mm in. mm
    1/8 to 1-1/2, incl 1/64 (0.015) 0.4 1/32 (0.031) 0.8
    Over 1-1/2 to 4, incl 1/32 (0.031) 0.8 1/32 (0.031) 0.8
    Over 4 to 8, incl 1/16 (0.062) 1.6 1/32 (0.031) 0.8
    Over 8 to 18, incl 3/32 (0.093) 2.4 1/32 (0.031) 0.8

    Straightness Tolerances

    Specified OD, in. Specified Wall Thickness, in. Maximum Curvature in any 3ft, in. Maximum Curvature i Total Length, in.
    Up to 5.0 incl. Over 3% OD to 0.5, incl. 0.03 0.010 x length, ft
    Over 5.0 to 8.0, incl. Over 4% OD to 0.75, incl. 0.045 0.015 x length, ft
    Over 8.0 to 12.75, incl. Over 4% OD to 1.0, incl. 0.06 0.020 x length, ft

    EN10216-5 1.4919 Seamless Stainless Steel Pipe Tolerance

    Tolerances for Outside Diameter (D) and Wall Thickness (T) of 316H Cold Finished Seamless Stainless Steel Pipe/Tube

    Tolerances on D≤219.1mm Tolerances on T
    Tolerance Class Permissible Deviation Tolerance Class Permissible Deviation
    D 3 ±0.75% or ±0.3mm whichever is the greater T 3 ±10% or ±0.2mm whichever is the greater
    D 4 a ±0.5% or ±0.1mm whichever is the greater T 4 a ±7.5 % or ±0.15mm whichever is the greater
    Note a : Tolerance class D 4 and T 4 is specified for tubes ordered cold finished

    Tolerances for Outside Diameter (D) and Wall Thickness (T) 

    Outside Diameter D Tolerances on D Tolerances on T
    mm Tolerance Class Permissible Deviation Tolerance Class Permissible Deviation
    30 ≤ D ≤ 219.1 D 2 ±1.0% or ±0.5mm whichever is the greater T 1 ±15% or ±0.6mm whichever is the greater b
    T 2 ±12.5% or ±0.4mm whichever is the greater
    219.1 ≤ D ≤ 610 D 1 ±1.5% or ±0.75mm whichever is the greater a 22.5%   -15% C
    T 1 ±15% or ±0.6mm whichever is the greater d
    T 2 ±12.5% or ±0.4mm whichever is the greater e
    Note a : The tubes shall be ordered with size ends. In the case a permissible deviation of the outside diameter of ±0.6% applied to the tube ends over a length of approx. 100mm.
    Note b : Applies to tubes with wall thickness T≤0.01 D and T≤4mm.
    Note c : Applies to tubes with wall thickness T≤0.05D
    Note d : Applies to tubes with wall thickness T:0.05D T≤0.09D
    Note e : Applies to tubes with wall thickness T0.09D

  • Previous:
  • Next:

  •