Stainless steel flange can be a plate or ring to form a rim at the end of a pipe when fastened to the pipe.
A stainless steel blind flange is a plate for covering or closing the end of a pipe.
A flange joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together. There are many different flange standards to be found worldwide.
With b technical force, advanced equipment and skilled craftsmanship, XINHANG STEEL can supply various types of flanges and good quality is guaranteed. Various steel grades flanges are produced with complete specifications and supreme quality.
These SS flanges are widely applied to industries as petroleum, chemical industry, machinery, electric power, chemical fiber, papermaking, printing and dyeing, food and pneumatic parts etc.
The company is provided with complete inspection equipment and adopts technical standards for various types of flanges.
Stainless Steel Flange |
|
Size | DN15-DN5000; |
Pressure Rating | 0.6-32MP |
Standard | ASME/ANSI B16.5/16.36/16.47A/16.47B, GB9112-9124, GB13402, SH3406, HG20615-20623, HG20592-20605, JB74-90, MSS SP-44, JIS2220-2001, DIN2527/2636/2637/2638/2566/2576/2632/2633/2635/2642/2653/2656/2655, BS1560-3.1, BS4504-3.1 |
Grades | ASTM:304, 304L, 316, 316L, 316Ti, 317L, 309, 309S, 310, 310S, 347H, 321, 321H, 904L, S31803, S32205, S32760
JIS:SUS304, SUS304L, SUS316, SUS316L, SUS316Ti, SUS317L, SUS321, SUS321H, |
Types | PL: Plate Flange WN: Welding Neck SO: Slip-on Flange/Slip-on Welding SW: Socket Welding IF: Integral Flange TH: Threaded Flange |
Face | FF: Flat Face RF: Raised Face(Finish height of face shall not be no less than nominal pipe wall thickness) TG: Tongue and Groove(Thickness of lap remaining after machining tongue or groove face shall be no less than the nominal wall thickness of the pipe used) MFM: Large Male and Female (Finished height of a male face shall be no less than wall thickness of pipe used or 0.25″, which is greater. Thickness of lap remaining after matching the female face shall be no less than the nominal wall thickness of pipe used) RJ: Ring Joint (Thickness of lap remaining after machining the ring groove shall be no less than the nominal wall thickness of pipe used) |
1.WN Flange
European System for Welding Neck Flange (WN)
Flange Surface |
Nominal pressure PN/MPa (bar) |
|||||||||
0.25 (2.5) |
0.6 (6) |
1.0 (10) |
1.6 (16) |
2.5 (25) |
4.0 (40) |
6.3 (63) |
10.0 (100) |
16.0 (160) |
25.0 (250) |
|
RF |
DN10-300 |
DN10-2000 |
DN10-1000 |
DN10-600 |
DN10-400 |
DN10-300 |
DN10-250 |
|||
MFM |
- |
DN10-600 |
DN10-400 |
DN10-300 |
- |
|||||
TG |
- |
DN10-600 |
DN10-400 |
DN10-300 |
- |
|||||
FF |
DN10-3000 |
DN10-2000 |
- |
|||||||
RJ |
- |
DN15-400 |
DN15-300 |
DN15-250 |
America System for Welding Neck Flange (WN)
Flange Surface |
Nominal pressure PN/MPa (Class) |
|||||
2.0(150LB) |
5.0(300LB) |
11.0(600LB) |
15.0(900LB) |
26.0(1500LB) |
42.0(2500LB) |
|
RF |
DN15-600(1/2″-24″) |
DN15-300(1/2″-12″) |
||||
MFM |
- |
DN15-600(1/2″-24″) |
DN15-65(1/2″-2.1/2″) |
DN15-300(1/2″-12″) |
||
TG |
- |
DN15-600(1/2″-24″) |
DN15-65(1/2″-2.1/2″) |
DN15-300(1/2″-12″) |
||
FF |
DN15-600(1/2″-24″) |
- |
||||
RJ |
DN25-600(1/2″-24″) |
DN15-600(1/2″-24″) |
DN15-300(1/2″-12″) |
2.SO Flange
European System for Slip-on Flange(SO)
Flange Surface |
Nominal pressure PN/MPa(bar) |
||||
0.6(6) |
1.0(10) |
1.6(16) |
2.5(25) |
4.0(40) |
|
RF |
DN10-300 |
DN10-600 |
DN10-150 |
||
MFM |
- |
DN10-600 |
|||
TG |
|||||
FF |
DN10-300 |
DN10-600 |
DN10-150 |
America System for Slip-on Flange(SO)
Flange Surface |
Nominal pressure PN/MPa (Class) |
|||||
2.0(150LB) |
5.0(300LB) |
11.0(600LB) |
15.0(900LB) |
26.0(1500LB) |
42.0(2500LB) |
|
RF |
DN15-600(1/2″-24″) |
DN15-300(1/2″-12″) |
||||
MFM |
- |
DN15-600(1/2″-24″) |
DN15-65(1/2″-2.1/2″) |
DN15-300(1/2″-12″) |
||
TG |
- |
DN15-600(1/2″-24″) |
DN15-65(1/2″-2.1/2″) |
DN15-300(1/2″-12″) |
||
FF |
DN15-600(1/2″-24″) |
- |
||||
RJ |
DN25-600(1/2″-24″) |
DN15-600(1/2″-24″) |
DN15-300(1/2″-12″) |
3.PL Flange
European System for Plate Welding Flange(PL)
Flange Surface |
Nominal pressure PN/MPa(bar) |
|||||
0.25(2.5) |
0.6(6) |
1.0(10) |
1.6(1.6) |
2.5(25) |
4.0(40) |
|
RF |
DN10-2000 |
|||||
FF |
DN10-2000 |
4.SW Flange
European System for SW Flange
Flange Surface |
Nominal Pressure PN/MPa |
|||||
(bar) |
||||||
1.0 |
1.6 |
2.5 |
4 |
6.3 |
10 |
|
-10 |
-16 |
(25) |
-40 |
-63 |
-100 |
|
RF |
DN10-50 |
|||||
MFM |
||||||
TG |
America System for SW Flange
Flange Surface |
Nominal Pressure PN (MPa) |
||||
(Class) |
|||||
2 |
5 |
11 |
15 |
26 |
|
Class 150 |
Class 300 |
Class 600 |
Class 900 |
Class 1500 |
|
RF |
DN15-80 |
DN15-80 |
|||
(1/2″-3″) |
(1/2″-2.1/2″) |
||||
MFM |
- |
DN15-80 |
|||
TG |
(1/2″-3″) |
||||
RJ |
DN25-80 |
||||
(1″-3″) |
5.TH Flange
European System for TH Flange
Flange Surface |
Nominal Pressure PN/MPa |
||||
(bar) |
|||||
0.6 |
1.0 |
1.6 |
2.5 |
4 |
|
-6 |
-10 |
(16) |
-25 |
-40 |
|
RF |
DN10-50 |
America System for TH Flange
Flange Surface |
Nominal Pressure PN (MPa) |
|||
(Class) |
||||
2 |
5 |
11 |
15 |
|
Class 150 |
Class 300 |
Class 600 |
Class 900 |
|
RF |
DN15-150 |
DN15-600 |
||
(1/2″-6″) |
(1/2″-24″) |
6.PJ/SE/RJ Flange
European System for PJ/SE/RJ Flange
Flange Surface |
Nominal Pressure PN/MPa |
||||
(bar) |
|||||
0.6 |
1.0 |
1.6 |
2.5 |
4.0 |
|
-6 |
-10 |
(16) |
-25 |
-40 |
|
RF |
DN10-600 |
America System for PJ/SE/RJ Flange
Flange Surface |
Nominal Pressure PN (MPa) |
|||||
(Class) |
||||||
2 |
5 |
11 |
15 |
26 |
42 |
|
Class 150 |
Class 300 |
Class 600 |
Class 900 |
Class 1500 |
Class 2500 |
|
RF |
DN15-600 |
DN15-300 |
||||
RJ |
(1/2″-24″) |
(1/2″-12″) |
7.BL Flange
European System for BL Flange
Flange Surface |
Nominal Pressure PN/MPa |
|||||||
(bar) |
||||||||
0.25 |
0.6 |
1 |
1.6 |
2.5 |
4 |
6.3 |
10 |
|
-2.5 |
-6 |
(10) |
-16 |
-25 |
-40 |
-63 |
-100 |
|
RF |
DN10-2000 |
DN10-1200 |
DN10-600 |
DN10-400 |
||||
MFM |
- |
DN10-600 |
DN10-400 |
|||||
TG |
- |
DN10-600 |
DN10-400 |
|||||
FF |
DN10-600 |
DN10-1200 |
- |
|||||
RJ |
- |
DN15-400 |
America System for BL Flange
Flange Surface |
Nominal Pressure PN (MPa) |
|||||
(Class) |
||||||
2 |
5 |
11 |
15 |
26 |
42 |
|
Class 150 |
Class 300 |
Class 600 |
Class 900 |
Class 1500 |
Class 2500 |
|
RF |
DN15-600 |
DN15-300 |
||||
(1/2″-24″) |
(1/2″-12″) |
|||||
MFM |
- |
DN15-600 |
DN15-300 |
|||
(1/2″-24″) |
(1/2″-12″) |
|||||
TG |
- |
DN15-600 |
DN15-300 |
|||
(1/2″-24″) |
(1/2″-12″) |
|||||
FF |
DN15-600 |
- |
||||
(1/2″-24″) |
||||||
RJ |
DN25-600 |
DN15-600 |
DN15-300 |
|||
(1″-24″) |
(1/2″-24″) |
(1/2″-12″) |
Packing Information
Stainless steel flanges from XINHANG STEEL are packed and labeled according to the regulations and customer’s requests. Great care is taken to avoid any damage which might be caused during storage or international transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
A. XINHANG STEEL Export Standard Seaworthy Packing for it.
Wooden Pallet, Plywood Case, Wooden Boxes.
B. Customization