By using TP 304L you get a corrosion resistant austenitic stainless steel with good formability. The steel is modified for machining and is available in a wide range of profiles and dimensions. The steel is often used for details within building and construction, machining industry.
The steel grade TP 304L (also called 1.4307) is a general purpose stainless steel, with good corrosion resistant, impact strength and formability. The steel is suitable for production of corrosion resistant products by machining. It has good corrosion resistance to uniform corrosion and to many slightly corrosive organic and inorganic chemicals. It is non-magnetic but may become somewhat magnetic after cold working and welding.
Typical application areas for TP 304L:
- Construction
- Building
- Reinforcement
- Machining
- Bolts
- Fittings
Certificate
The steelworks has certificate as an approved material supplier of this steel grade from ABS, BV, DNV-GL, TUV, LR,KR and CCS.
Specification |
|
Size |
OD: 6.0 ~ 406.4mm; WT: 1 ~ 50mm; O.D.1/8”-16”;W.T.:SCH 10(S);-SCH XXS Length: as your requirement,11.8M MAX; |
Process |
Seamless, Cold Drawn, Cold Rolled |
End |
PE(Plain End), BE(Beveled End), |
Surface |
Aid Pickling, Polishing, |
Standard |
ASTM A312, ASTM A213, EN10216-5, DIN 17456, DIN 17458, JIS G3459, JIS G3463, ASTM A269 |
Other Names |
|
Theoretical Weight(kg/m) |
Weight/meter = (OD-WT)*WT*0.02491 Both OD and WT in mm. |
Note:
OD is the specified outside diameter.
WT is the specified wall thickness
Stainless steel pipes shall be pickled free of scale. When bright annealing is used, pickling is not necessary.
Plain ends cut and deburred will be furnished. If threaded ends or ends beveled for welding are desired, give details.
Chemical Composition
Element |
UNS S30400(304) |
C, max |
0.035 |
Mn, max |
2.00 |
P, max |
0.045 |
S, max |
0.030 |
Si, max |
1.00 |
Ni |
8.00-11.0 |
Cr |
18.0-20.0 |
Mechanical Properties
Alloy |
Temper |
Tensile Strength |
Yield Strength, 0.2% |
Elongation in2 in. or |
UNS S30400 |
Solution Annealed |
75 (515) |
30 (205) |
35 |
Tolerances in Wall Thickness
NPS Designator |
Tolerance, % from Nominal |
||
Over |
Under |
||
1/8 to 2-1/2 incl., all t/D ratios |
20 |
12.5 |
|
3 to 18 inch., t/D up to 5% incl. |
22.5 |
12.5 |
|
3 to 18 inch., t/D>5% |
15 |
12.5 |
|
20 and larger, welded, all t/D ratios |
17.5 |
12.5 |
|
20 and larger, seamless, t/D up to 5% incl. |
22.5 |
12.5 |
|
20 and larger, seamless, t/D>5% |
15 |
12.5 |
Note: t = Nominal Wall Thickness; D = Ordered Outside Diameter
Tolerances in Outside Diameter
NPS Designator |
Tolerances in Outside Diameter |
|||
Over |
Under |
|||
in. |
mm |
in. |
mm |
|
1/8 to 1-1/2, incl |
1/64 (0.015) |
0.4 |
1/32 (0.031) |
0.8 |
Over 1-1/2 to 4, incl |
1/32 (0.031) |
0.8 |
1/32 (0.031) |
0.8 |
Over 4 to 8, incl |
1/16 (0.062) |
1.6 |
1/32 (0.031) |
0.8 |
Over 8 to 18, incl |
3/32 (0.093) |
2.4 |
1/32 (0.031) |
0.8 |
Straightness Tolerances
Specified OD, in. |
Specified Wall Thickness, in. |
Maximum Curvature in any 3ft, in. |
Maximum Curvature i Total Length, in. |
Up to 5.0 incl. |
Over 3% OD to 0.5, incl. |
0.03 |
0.010 x length, ft |
Over 5.0 to 8.0, incl. |
Over 4% OD to 0.75, incl. |
0.045 |
0.015 x length, ft |
Over 8.0 to 12.75, incl. |
Over 4% OD to 1.0, incl. |
0.06 |
0.020 x length, ft |
Tests of TP304L Pipe
1.Chemical Analysis (ASTM E345)
2.Mechanical Properties (Tension: ASTM E8)
3.Nondestructive Test
3.1:100% ET
3.2:According to ASTM A450/A450M
4.PMI
Schedules of Cold-drawn TP304L Pipe
The schedules of cold-drawn, seamless TP304L pipe as given in below table are regularly available. Other schedules may be furnished, and the manufacturer should be consulted.
Nominal Pipe Size |
Outside Diameter |
Nominal Wall Thickness |
|||
SCH5S |
SCH10S |
SCH40S/STD |
SCH80S |
||
1/8 |
10.3 |
– |
1.24 |
1.73 |
2.41 |
1/4 |
13.7 |
– |
1.65 |
2.24 |
3.02 |
3/8 |
17.1 |
– |
1.65 |
2.31 |
3.20 |
1/2 |
21.3 |
1.65 |
2.11 |
2.77 |
3.73 |
3/4 |
26.7 |
1.65 |
2.11 |
2.87 |
3.91 |
1 |
33.4 |
1.65 |
2.77 |
3.38 |
4.55 |
1 1/4 |
42.2 |
1.65 |
2.77 |
3.56 |
4.85 |
1 1/2 |
48.3 |
1.65 |
2.77 |
3.68 |
5.08 |
2 |
60.3 |
1.65 |
2.77 |
3.91 |
5.54 |
2 1/2 |
73.0 |
2.11 |
3.05 |
5.16 |
7.01 |
3 |
88.9 |
2.11 |
3.05 |
5.49 |
7.62 |
3 1/2 |
101.6 |
2.11 |
3.05 |
5.74 |
8.08 |
4 |
114.3 |
2.11 |
3.05 |
6.02 |
8.56 |
5 |
141.3 |
2.77 |
3.40 |
6.55 |
9.53 |
6 |
168.3 |
2.77 |
3.40 |
7.11 |
10.97 |
8 |
219.1 |
2.77 |
3.76 |
8.18 |
12.70 |
10 |
273.1 |
3.4 |
4.19 |
9.27 |
12.70 |
12 |
323.9 |
3.96 |
4.57 |
9.53 |
12.70 |
14 |
355.6 |
3.96 |
4.78 |
9.53 |
– |
16 |
406.4 |
4.19 |
4.78 |
9.53 |
– |
Packing Information
wooden case
Bundle package